 SX210
Microprocessor Digital Timer
The SX210 timer is a microprocessor
based digital timer housed in a
standard DIN style case (68mm square cutout). The small case
and
front bezel require minimal panel space yet provide large, easy
to use programming keys and a .3 inch high LED display.
More...
|
 SX410/430
Dual Setpoint Timer
The SX410 and the SX430 are dual setpoint
timers featuring an inhibit
function that allows the timing operation of the units to be
stopped
without resetting the timed value or the outputs. The many operating
modes and the four time ranges are programmed using rocker switches
on the back of the unit. This programming method provides both
simplicity and security. The front panel display has a prompted
programming routine that shows the user how to program variables
such as setpoints and the display cycle progress direction.
More... |
 CX300
Microprocessor Timer/Counter
The CX300 is a microprocessor based
timer/counter housed in a standard 15 terminal CYCL-FLEX®
plug-in case which allows easy removal for programming changes
and replacement. Time or count operation, time range, and the
type of start input switch operation are programmed with 7 miniature
rocker switches located inside the unit housing. More... |
 CX400
Dual Setpoint Timer/Counter
The CX400 is a microprocessor based,
dual setpoint timer/counter housed in a standard 15 terminal
CYCL-FLEX® plug-in case which allows easy removal for programming
changes and replacement. Time or count operation, time range,
and the type of start input switch operation are programmed
with 7 miniature rocker switches located inside the unit housing.
More...
|
 DG100
MINIFLEX® Solid State Timer
The DG100 is a solid state timer housed
in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated
circuits for the timing function. The DG100 series timer is
available in 16 time ranges from 3.5 seconds to 30 hours. Time
is set with a knob referenced to a graduated scale. A pilot
light on the front of the unit indicates when the unit is timing.
More...
|
 DG200
MINIFLEX® Digital Set Reset Timer
The DG200 series timer is a microprocessor
based four digit reset timer housed in a 1/8 DIN style enclosure.
Four push-button switches on the front of the unit provide exact
setting of the time setpoint. There are four time ranges from
99.99 seconds to 99 hours and 99 minutes. More...
|
